Belt Conveyor

Belt conveyor generally consists of side plate, rubber plate and a cover plate, side plate usually adopts steel structure. In order to prevent the material from belt conveyor bottom side and running conveyor belt between the leak out, bottom and conveying belt between the voids commonly used rubber plate seal, rubber plate fixed or clamped on the outer side of the belt conveyor.

Belt Conveyor

Belt Conveyor General Structure

Belt conveyor generally consists of side plate, rubber plate and a cover plate, side plate usually adopts steel structure. In order to prevent the material from belt conveyor bottom side and running conveyor belt between the leak out, bottom and conveying belt between the voids commonly used rubber plate seal, rubber plate fixed or clamped on the outer side of the belt conveyor. The edge of the rubber plate should be designed into an angle, in order to better sealing caused by the gravity of materials to support roller conveyor belt bending, so as to achieve a good sealing effect and the covering layer of conveyor belt wear to the minimum. To prevent dust, the mobile belt conveyor cover is usually used.

In the actual production requirements of many projects, the sealing of the rubber wear resistance and sealing effect is not ideal, usually in the case of low sealing requirements. The general use of the high sealing products is the overflow skirt board, its structure is generally composed of the clip holder and skirt board.

Ordinary mobile belt conveyor is composed of side plates, rubber plate, a cover plate and a sealing rubber strip,. Whether the rectangular mouth and horn shaped mouth, in the actual production site are subject to many aspects of the constraints of the field conditions. As we all know, to make the belt conveyor normal operation, not only requires the conveyor belt feeding to be appropriate, but also requires the unloading of the conveyor belt should be thorough. To belt conveyor feeding need to consider many aspects, of which the most important is the material to the conveyor belt of the central, the material along the conveyor belt running direction of speed as far as possible and conveying belt running speed equal. If the speed of the material is different from the speed of the conveyor belt, there will be plenty of material at the feeding point and may be piled up there.. This material is caused by a speed difference when it is bouncing.

Although, in material reproduced at will according to the different craft condition to determine the reasonable reproduced scheme, in order to avoid in actual production in the process of plugging material and many other issues, but due to the production site, there are many unpredictable factors to achieve expected effect to are not satisfactory to the. Therefore, the appropriate change and adjustment of the structure of the belt conveyor, will play a pivotal role in the actual production.

Technical Data

Application

Belt conveyor is mostly applied to numerous medium and soft mineral &rock materials, such as limestone, feldspar, calcite, talc, barite, clay, tombar thite, kaolin, gypsum, and graphite, etc.

Request for Quotation

You can get the price list and a SBM representative will contact you within one business day.